On this page : Speaker cable HFTNs and In-Cable Interconnect HFTNs

A Parallel HFTN for use with speaker cables, now available from DNM.

NEW : DNM HFTN wins Best of 2013 award

The DNM RF termination system, named "High Frequency Termination Network" (HFTN), is a precision circuit that controls the radio frequency (RF) load presented by the cable to the amplifier. The HFTN terminates the cable at the radio frequencies that are generated by the amplifier's feedback system.
Audio frequency signals are not directly modified by the HFTN but the amplifier/cable RF interface is so greatly improved that the amplifier's feedback accuracy is enhanced. This gives a substantial increase in audio clarity.

The DNM speaker cable HFTN is a parallel design for use with DNM Stereo Resolution Speaker cable and DNM Stereo Solid Core Precision speaker cable. However in most circumstances, the DNM HFTN will also improve the performance of other brands of speaker cable.

The photograph at the top of this document shows how the speaker cable HFTNs are supplied by DNM Design.
The pair of HFTNs is fitted with a short length of cable (as part of its assembly) with pre-stripped conductors. One pair of HFTNs can be used at one end of a stereo speaker cable. As a starting point, we suggest fitting these HFTNs to your amplifier first.

Your Speaker cable HFTNs can optionally be fitted with speaker plugs (from the DNM online shop) to suit your application. Just order the extra plugs you need here, there is no charge for DNM to fit these plugs to your speaker HFTNs.

If AIRSURE shipping is available to your country (or Special Delivery in the UK), we strongly recommend using it when buying HFTNs, for faster, tracked, more reliable delivery with better compensation for lost goods.


If in doubt about what to order (for example if you need an odd number of Speaker cable HFTNs or if you are unsure about postage), please email DNM Design or use the Contact Us button at the top of this page.

illustration showing how the speaker cable HFTN's connect to the speaker
cable

The DNM RF termination system, named "High Frequency Termination Network" (HFTN), is a precision circuit that controls the radio frequency (RF) load presented by the cable to the amplifier. The HFTN terminates the cable at the radio frequencies that are generated by the amplifier's feedback system.
Audio frequency signals are not directly modified by the HFTN but the amplifier/cable RF interface is so greatly improved that the amplifier's feedback accuracy is enhanced. This gives a substantial increase in audio clarity.

The In-Cable High Frequency Termination Network (HFTN) is now available for DIY soldering into DNM cables near the plugs.

The In-Cable HFTNs can be ordered with DNM cable - or separately - in the DNM online shop.
To do this you only need to add to your order the number of In-Cable HFTNs (4 for each stereo cable).

Each In-Cable HFTN is just 48mm long by 13mm wide and only two wires need to be soldered on at each end of the In-Cable HFTN.

Existing DNM cables can also be upgraded by adding In-Cable HFTNs - just order the number of In-Cable HFTN's needed (4 for each stereo cable).

If AIRSURE shipping is available to your country (or Special Delivery in the UK), we strongly recommend using it when buying HFTNs, for faster, tracked, more reliable delivery with better compensation.


Please note that all In-Cable HFTNs (balanced, unbalanced and DNM 3D unbalanced) are the same price. If in doubt about what to order, please email DNM Design or use the Contact Us button at the top of this page.

More details here including soldering instructions

The DNM RF termination system, named "High Frequency Termination Network" (HFTN), is a precision circuit that controls the radio frequency (RF) load presented by the cable to the amplifier. The HFTN terminates the cable at the radio frequencies that are generated by the amplifier's feedback system.
Audio frequency signals are not directly modified by the HFTN but the amplifier/cable RF interface is so greatly improved that the amplifier's feedback accuracy is enhanced. This gives a substantial increase in audio clarity.

The In-Cable High Frequency Termination Network (HFTN) is now available for DIY soldering into DNM cables near the plugs.

The In-Cable HFTNs can be ordered with DNM cable - or separately - in the DNM online shop.
To do this you only need to add to your order the number of In-Cable HFTNs (4 for each stereo cable).

Each In-Cable HFTN is just 48mm long by 13mm wide and only two wires need to be soldered on at each end of the In-Cable HFTN.

Existing DNM cables can also be upgraded by adding In-Cable HFTNs - just order the number of In-Cable HFTN's needed (4 for each stereo cable).


If AIRSURE shipping is available to your country (or Special Delivery in the UK), we strongly recommend using it when buying HFTNs, for faster, tracked, more reliable delivery with better compensation.


Please note that all In-Cable HFTNs (balanced, unbalanced and DNM 3D unbalanced) are the same price. If in doubt about what to order, please email DNM Design or use the Contact Us button at the top of this page.

More details here including soldering instructions

The DNM RF termination system, named "High Frequency Termination Network" (HFTN), is a precision circuit that controls the radio frequency (RF) load presented by the cable to the amplifier. The HFTN terminates the cable at the radio frequencies that are generated by the amplifier's feedback system.
Audio frequency signals are not directly modified by the HFTN but the amplifier/cable RF interface is so greatly improved that the amplifier's feedback accuracy is enhanced. This gives a substantial increase in audio clarity.

The In-Cable High Frequency Termination Network (HFTN) is now available for DIY soldering into DNM cables near the plugs.

The In-Cable HFTNs can be ordered with DNM cable - or separately - in the DNM online shop.
To do this you only need to add to your order the number of In-Cable HFTNs (4 for each stereo cable).

Each In-Cable HFTN is just 48mm long by 13mm wide and only two wires need to be soldered on at each end of the In-Cable HFTN.

Existing DNM cables can also be upgraded by adding In-Cable HFTNs - just order the number of In-Cable HFTN's needed (4 for each stereo cable).

If AIRSURE shipping is available to your country (or Special Delivery in the UK), we strongly recommend using it when buying HFTNs, for faster, tracked, more reliable delivery with better compensation.


Please note that all In-Cable HFTNs (balanced, unbalanced and DNM 3D unbalanced) are the same price. If in doubt about what to order, please email DNM Design or use the Contact Us button at the top of this page.

More details here including soldering instructions