Sale : 50% off : DNM Phono Plugs!

The DNM Phono Plug is selected for its low metal content, to minimise eddy current formation and ensure a good audio performance.

The pair is supplied as one red and one black. The internal connections are soldered.

For the number of plugs needed for different DNM cables, see here.

To order more than 10 pairs, use the contact us button above to email DNM for pricing.

Phono Sockets (PAIR)

The pair is supplied as one red and one black. The internal connections are soldered.

To order more than 10 pairs, use the contact us button above to email DNM for pricing.

3.5mm Plug (stereo)

The internal connections are soldered.

To order more than 10 plugs, use the contact us button above to email DNM for pricing.

These high quality DIN plugs have minimum metal content for best sound. As they have locking collars which may not suit ordinary DIN sockets, these plugs are intended solely for use with DNM amplifiers.

For the number of plugs needed for different DNM cables, see here.

For more than 10 plugs, use the contact us button above to email DNM for pricing.

NB : TWO of this item must be ordered at each end of the cable for stereo use.

For the number of plugs needed for different DNM cables, see here.

We recommend using a complete four-conductor ribbon for each channel, connecting the two inner conductors (blue and white) in parallel for the equipment ground connection.

For more than 10 of this item, use the contact us button above to email DNM for pricing.

NB : TWO of this item must be ordered at each end of the cable for stereo use.

For the number of plugs needed for different DNM cables, see here.

We recommend using a complete four-conductor ribbon for each channel, connecting the two inner conductors (blue and white) in parallel for the equipment ground connection.

For more than 10 of this item, use the contact us button above to email DNM for pricing.

These high quality tonearm DIN plugs are offered for use with Shielded tonearm cables connecting to the phono stage or amplifier.

One plug is needed per tonearm since it is only needed at the tonearm end of the cable.

4mm banana plugs for non-DNM amplifiers using the new "leaf" design. Solder connections. A pair of plugs, with one red and one black plug.

These new "leaf" 4mm plugs can be stacked for bi-wiring from amplifiers with only one set of 4mm sockets.

For the number of plugs needed for different DNM cables, see here.

Soldering Instructions for these plugs and DNM cables : please see pages 10 to 12 in this PDF document.

For more than 10 pairs, use the contact us button above to email DNM for pricing.

These are the best-sounding speaker cable plugs for DNM amplifiers. These sprung body banana plugs mate very well with the sockets used on DNM PA3/PA3S amplifiers. Solder connections. A pair of plugs, with one red and one black plug.

For the number of plugs needed for different DNM cables, see here.

For more than 10 pairs, use the contact us button above to email DNM for pricing.

Spade terminals with solder connections (one red and one black). Please order quantity TWO for normal stereo use at one end of your speaker cables.